|  Home  |  IPC  |  Training  |  Publications  |  Lead-Free  |  Links  |  Technical stuff  |  Contact Us  |

Industry standards   Training materials  - Certification kits  - IPC certification  - Assembly training  - PCB training  - Top 10 training aids   Latest news   New releases   Our IPC top 10   IPC price list   Updates   Downloads   Click here to order

CTC TRAINING KITS FOR ELECTRONICS MANUFACTURING  CTC Repair Skills Certification Kit Damaged Surface Mount Pads Damaged Conductor Damaged Lands Damaged Edge Contacts Damaged Base Board Damaged Plated Holes When the experienced soldering operators and technicians on your staff need CTC Repair Skills Certification, or re-certification to IPC-7721, you’ll really appreciate how much time and money this kit can save you. Instead of sending employees to classes for two or three days, they work on the projects in this kit at their own pace. There are no deadlines, no pressure, no hassle, no travel or stay-overs. Once the projects are finished, they are returned to Circuit Technology Center for evaluation and grading. Upon acceptance, the Operator who completed the project will receive the official IPC 7721 Repair Skills Certification for Operators. It’s that simple…and you’ve saved a bundle on travel expenses and time away from work. This Certification Kit uses the Challenge Test provision of the IPC 7711/7721 Rework and Repair Certification Program. As an official IPC Certification Center, the Circuit Technology Center are authorized to allow Operators to take a Challenge Test, without attending live training course. Operators who successfully complete the projects in this Certification Kit will receive the same certification as Operators who attend live training courses. Operator Experience This kit contains challenging projects to test an Operator's soldering and rework skills. To expect a passing grade, it is advisable that Operators have a reasonable level of experience, or prior training. A Practice Kit is also available. Practice and Training Kits This CTC Repair Skills Practice Kit will help Operators brush up on their circuit board repair skills and give them a definite advantage toward becoming certified. The kit containing the same defective circuit board and all the materials included in the full certification kit. The CTC Repair Training Kit includes every tool an Operator could need to complete the CTC Repair Skills Certification Kit.  CTC Soldering Skill Certification Kit When the experienced soldering operators and technicians on your staff need CTC Soldering Skills Certification, or re-certification, you’ll really appreciate how much time and money this kit can save you. Instead of sending employees to classes for two or three days, they work on the projects in this kit at their own pace. There are no deadlines, no pressure, no hassle, no travel or stay-overs. Once the projects are finished, they are returned to Circuit Technology Center for evaluation and grading. Upon acceptance, the Operator who completed the project will receive the official CTC Soldering Skills Certification for Operators to IPC-7721. It’s that simple…and you’ve saved a bundle on travel expenses and time away from work. This Certification Kit uses the Challenge Test provision of the CTC Rework and Repair Certification Program. As an official IPC Certification Center, the Circuit Technology Center are authorized to allow Operators to take a Challenge Test, without attending live training course. Operators who successfully complete the projects in this Certification Kit will receive the same certification as Operators who attend live training courses. Operator Experience This kit contains challenging projects to test an Operator's soldering and rework skills. To expect a passing grade, it is advisable that Operators have a reasonable level of experience, or prior training. A Practice Kit is also available. Practice Kit Are your soldering operators ready for certification? The best way to find out is to order our Soldering Skills Practice Kit that let’s them work on actual projects until they develop the expertise they need to be certified. We provide the tools and practice board and you decide when they’re ready for the Certification Kit. Freight, duties, and value added taxes may increase prices for products outside the US. Grading The project grading will be to current IPC-A-610 Acceptability of Electronic Assemblies criteria. Operators select either Class 2, or Class 3 grading. Operators will be graded in 5 sections. Operators may omit sections if certification in those areas is not required by their organization. Operators will receive a Certification only for those sections completed successfully. To receive a successful grade in each section every element of the work must meet or exceed the IPC-A-610 Acceptability of Electronic Assemblies criteria. Only minor blemishes are acceptable. The 5 sections include the following. Through Hole Component Soldering Chip Component Soldering J-Lead Component Soldering Gull Wing Component Soldering Fine Pitch Gull Wing Component Soldering  CTC Rework Skills Certification Kit The CTC Rework Skills Certification Kit is a great way to get official IPC certification for circuit board rework without the time and expense of travelling to attend classes. This kit is intended for operators and instructors who need to be certified or, recertified. Designed for persons with specific work experience in circuit board rework, the kit contains challenging projects to test your abilities. There are no time limits or schedules involved. You complete these rework projects on a time-available basis and return the kit for evaluation. Upon acceptance, you will receive a certificate confirming that you demonstrated the competent skills needed to meet the demands of modern circuit board rework shown in IPC-7711. Operator Experience This kit contains challenging projects to test an Operator's soldering and rework skills. To expect a passing grade, it is advisable that Operators have a reasonable level of experience, or prior training. A Practice Kit is also available. Practice Kit Studying before a big exam has always been a good idea. That’s why we put together the Rework Skills Practice Kit that will help Operators become familiar with the various rework methods before certification. They work on the practice projects as long as they want, building their confidence, then go for official IPC certification. Grading The project grading will be to current IPC-A-610 Acceptability of Electronic Assemblies criteria. Operators select either Class 2, or Class 3 grading. Operators will be graded in 10 sections. Operators may omit sections if certification in those areas is not required by their organization. Operators will receive a Certification only for those sections completed successfully. To receive a successful grade in each section every element of the work must meet or exceed the IPC-A-610 Acceptability of Electronic Assemblies criteria. Only minor blemishes are acceptable. The 10 sections include the following. Through Hole Component Soldering Through Hole Component Removal Chip Component Soldering Chip Component Removal J-Lead Component Soldering J-Lead Component Removal Gull Wing Component Soldering Gull Wing Component Removal Fine Pitch Gull Wing Component Soldering Fine Pitch Gull Wing Component Removal ©2004 Dynamix Technology Ltd